Choose Your Skin



Choose Your Layout Style



Patterns for Boxed Version



You can build your own skin very easily!

Dyer Vent Cleaning - Stop A Fire By Cleaning Your Dryer Vent

Dyer Vent Cleaning - Stop A Fire By Cleaning Your Dryer Vent

Do you know--- Only 60% of the lint is captured in the lint trap of residential and commercial garments dryers. The opposite forty% is vented outside. Over time, the damp lint accumulates to the inside of the duct. The outcome is sort of a clogged pipe that turns into more restricted over time which can cause a fire hazard! Based on the Nationwide Fire Safety Affiliation, 16,000 fires begin in the laundry room every year.

Additionally, the Shopper Product Safety Commission estimates more than 84.four million in property damage annually. This is a reality that needs to be taken seriously. The State Fire Marshal recommends that your dryer vent be cleaned or inspected annually to ensure your safety.


Listed below are some signs your dryer vent might want cleaning dryer vents:

If it takes longer than one cycle on your garments to dry, or the clothes are very hot after drying, this is an efficient sign your vent wants cleaning.
If the garments have a musty odor after drying.
In case your dryer shuts off or stops throughout a cycle, the component could also be getting too sizzling from the duct restriction.
If there may be quite a lot of lint escaping from the back of the dryer.
If the outside vent has lint masking the outside of the vent cover.
Listed here are the advantages of a clear dryer vent:
Reduce laundry drying instances
Avoid dryer factor replacement costs
Improve the standard of dried clothes
Save money on utility bills
Forestall a dryer fire!
So, how do you go about cleaning your dryer vent. Here are the steps when you plan to do it yourself.
1. Get the appropriate tools. For this job you will want a shop vac and extension hose of at the least 10 to fifteen toes, depending on the length of the dryer vent outside to your dryer. Next, you will need a flexible cable with a brush on the top (will be found on-line) to snake by the duct, and eventually, a dust mask and gloves to protect yourself from the airborne lint.

2. Disconnect your dryer from the flexible duct and clean the back of the dryer and any lint that has amassed beneath the dryer. Check the flexible duct and change it with a new one whether it is damaged or has holes. The primary part of the process will contain running the flexible cable and vacuum from the inside of the house by your dryer. The second a part of the process includes the same thing solely from the outside by your dryer vent that goes to the outside.

3. Run the versatile snake with brush by way of the dryer vent duct so far as you possibly can go, be careful not to push previous any turns or angles that might cause the cable to get caught within the ductwork, in any other case you should have a troublesome time getting it out. Vacuum out the free lint with the shop vac and hose. Run the hose as far into the duct as you can go.

4. Find the place your dryer vents to the outside of the house. Remove any dryer vent hardware to access the duct.

5. Repeat the process from the outside, running your versatile cable into the duct (toward the dryer) and vacuum out the loose lint. Observe this by hooking the dryer back up to the versatile duct inside the house and switch the dryer on, any remaining lint will blow out of the duct. Finally, exchange any hardware on the outside of the house.